As the prime contractor of the Infanterist der Zukunft program on behalf of the Bundeswehr, Rheinmetall Electronics has placed a major order with Safran Electronics & Defense, building on the long-standing and successful collaboration between the two companies. Under this contract, Safran Electronics & Defense will deliver a significant volume of optronic systems, including over a thousand MOSKITO systems and several hundred SHARPCROW systems to equip the Bundeswehr’s medium and heavy infantry forces.

?As part of this program, Safran Electronics & Defense has been selected to provide advanced portable observation systems that enable German infantry forces to better understand their environment, detect and identify targets, and quickly share critical information on the battlefield.

The MOSKITO is a compact, lightweight multifunction observation system combining day and night vision, laser range-finding and precise target geolocation. It enables rapid detection, identification and localization of targets across a wide range of operational environments.

The SHARPCROW is a handheld electro-optical observation system integrating thermal imaging, low-light imaging, a direct optical day channel, target location capabilities and digital reporting functions. Together, these features provide enhanced situational awareness and support faster, more informed tactical decision-making.

“This new order underscores the Bundeswehr’s confidence in our technologies and in our ability to equip the modern soldier with the advanced capabilities required for today’s land operations. We are proud that these systems will be manufactured in Germany by Safran Electronics & Defense, further strengthening our partnership with the Bundeswehr and the German defense industry.” said Marzell Schiller, CEO of Safran Electronics & Defense Germany.

The Bundeswehr is accelerating the modernization of its dismounted forces through additional procurements under the proven Infanterist der Zukunft (“Infantryman of the Future”) soldier system. As the German Armed Forces’ flagship infantry modernization program, Infanterist der Zukunft aims to enhance soldiers’ effectiveness, survivability, command and control, mobility and endurance by equipping them with advanced, digitally connected capabilities.

This entry was posted
on Tuesday, September 8th, 2026 at 22:00 and is filed under Advertiser, Contracts, International, Optics, Press Release.
You can follow any responses to this entry through the RSS 2.0 feed.

Richmond, VA. (August 21st, 2026) – German Precision Optics (GPO USA) proudly announces the GPO upgraded RangeGuide 10×50 Rangefinding Binocular,   now enhanced with significant upgrades in usability, performance, and design.  Unveil exceptional high resolution optical quality and cutting-edge rangefinding technology in a compact, rugged design.

Engineered to rival the size and handling of traditional 42mm binoculars, the upgraded GPO RangeGuide 10×50 remains a compact powerhouse, delivering premium optical clarity and industry-leading ranging capability in a remarkably lightweight design. Designed for hunters and long-range shooters who demand precision without bulk, this latest generation raises the bar even further. Building on the success of one of GPO’s most popular products, the upgraded RangeGuide 10×50 introduces a newly enhanced electronic system and next-generation laser technology, extending its maximum ranging capability to an impressive 3,600 yards.

The RangeGuide features an eye-safe Class 1 laser with rapid 0.25-second response time, delivering instant and reliable distance measurements. Integrated True Range Angle Technology calculates precise compensated distances based on incline or decline, ensuring accuracy in even the most challenging terrain. It also features a significantly improved display system, offering enhanced clarity and readability in all lighting conditions. In addition, refined mode functionality makes operation more intuitive and user-friendly in the field allowing users to access critical data faster and with greater ease.  

At the core of the RangeGuide is GPO’s renowned optical system. The double-HD laminated 50mm objective lenses, paired with proprietary GPObright high-transmission coatings, deliver outstanding light transmission, edge-to-edge sharpness, and superior resolution, especially in low-light conditions. Standing just 6.3 inches tall and weighing only 35 ounces, the RangeGuide features a rugged armor coated housing built to withstand the harshest outdoor environments. The RangeGuide 10×50 delivers an impressive twilight factor of 22.36. Its ultra-compact footprint is made possible by a magnesium chassis and a highly efficient internal laser offering maximum performance. Whether glassing in the mountains or ranging targets across open terrain, this binocular is built to excel.

“The RangeGuide 10×50 has always been a cornerstone product for us,” said Mike Jensen, Owner and CEO of GPO, USA. “With these upgrades, we’ve made it even more powerful, more intuitive, and more aligned with what today’s hunters expect in the field.

Features

• Over 3,000-yard ranging capability

• True-range angle technology calculates the proper distance to your target

• Measures the angle of your target

• Scan mode provides three readings per second

• Temperature reading to assist your shot placement

• OLED display with nine adjustable brightness levels

• Extremely small and compact

• GPObright lens coating technology

Specifications

• Exit pupil: 5mm

• Eye relief: 17mm

• Close focus: 9.8’

• Field of View: 330 ft @ 1,000 yards

• Waterproof

• Weight: 35 oz

• Dimensions: H 2.2” x W 5.3”x L 6.3”

The upgraded RangeGuide 10×50 rangefinding binoculars retail for $1,659.99. It is now shipping from Germany and will be available through authorized GPO dealers nationwide and online at www.gpo-usa.com.

This entry was posted
on Friday, September 4th, 2026 at 22:00 and is filed under Optics, Press Release.
You can follow any responses to this entry through the RSS 2.0 feed.

Gen 2 Hot Weather Jungle Boot by McRae Footwear

Rucking. Range days. Field exercises. Long miles under load. For those who demand more from their footwear, Rocky Boots has introduced three new military styles built to keep up when the mission gets demanding.

The new C4T Commercial Military Boot, USMC S2V Military Boot and USMC S2V Steel Toe Military Boot give military personnel, tactical professionals and serious outdoor athletes purpose-built options for everything from loaded rucks to extended time on the range.

For lighter, faster movement: The Rocky C4T Commercial Military Boot weighs just 1.25 pounds per boot and combines a dual-density EVA/rubber outsole with 5mm lugs, a fiberglass shank and a wide toe box. Its breathable full-grain leather construction and Rocky Air-Port Comfort footbed are designed to deliver comfort during long days on foot. The boot is also GSA, TAA and military uniform compliant.

For serious rucking and field use: The Rocky USMC S2V Military Boot is built around Rocky’s proven S2V platform and is USMC certified as of 2025. It pairs water-resistant, flash-resistant leather with 1,000-denier CORDURA® nylon, S2V Sieve technology for air circulation and water drainage, Roll-Stop Ankle Stability and a high-walled Vibram® sole. Triple-stitched construction adds another layer of durability for hard use. The Berry-compliant boot is made in the USA.

For added protection: The Rocky USMC S2V Steel Toe Military Boot takes the S2V platform and adds an ASTM-compliant steel toe and electrical hazard protection. It maintains the features that make the S2V a strong choice for demanding environments, including 1,000-denier CORDURA®, water-resistant leather, S2V Sieve technology, Roll-Stop Ankle Stability and a high-walled Vibram® sole.

For ruckers and tactical athletes, footwear can make or break a long day under load. Rocky’s latest military boots are engineered to provide the stability, traction, durability and protection needed when miles, weight and terrain start adding up.

This entry was posted
on Wednesday, September 2nd, 2026 at 10:00 and is filed under Admin, Boots, Guest Post.
You can follow any responses to this entry through the RSS 2.0 feed.

Richmond, VA. (August 14th, 2026) – German Precision Optics(GPO USA) proudly announces the GPO SetbackÔ Cantilever 3” extension mount designed for compact tactical 30mm riflescopes. This design allows compact riflescopes to be mounted up to either 3” forward or rearward, depending on what the optical system requires for optimal eye relief.

“This new mount is a must for compact riflescope users,” said Mike Jensen, Owner and CEO of GPO, USA. “Most riflescope mounts push optics forward. Compact tactical scopes often require the opposite. The GPO SetBack allows you to bring the optic rearward, allowing shooters to achieve proper eye relief, faster target acquisition, and a more natural head position behind the rifle. The result is improved comfort, a full sight picture, and maximum performance from today’s compact precision optics.”

The GPO SetBack 3” cantilever was designed and engineered specifically for today’s ultra-compact tactical optics. While compact scopes offer significant advantages in weight, balance, and handling, their shorter main tube length often limits mounting flexibility and can place the optic too far forward for proper eye relief. The SetBack solves this problem by moving the scope mounting position up to 3 inches rearward, allowing shooters to achieve a full field of view and a comfortable shooting position without compromising rail engagement or mounting security. The GPO SetBack ensures your optic sits exactly where it should, closer or further to your eye and ready for maximum performance.

This ingenious extension mount is precision machined from a single billet of aircraft-grade aluminum. The unique one-piece mount delivers exceptional rigidity, precise ring alignment, and dependable return-to-zero performance under heavy recoil and demanding in-the-field conditions. Although 1-piece, it has extremely narrow ring gap, less than 2.5”, made specifically for scopes with extremely limited mounting surface (ie the GPO CENTURI Super-Compact series).  Designed for riflescopes with a 30mm main tube, the SetBack features four hardened steel Allen-head cross-bolts that provide a secure, repeatable attachment to any Mil-Std 1913 Picatinny rail.

Premium features include:

• Positions the scope up to 3” rearward or forward for optimal eye relief

• Designed for 30mm main tube riflescopes

• One-piece precision-machined aircraft-grade aluminum construction

• Four hardened steel Allen-head cross-bolts for maximum mounting security

• Mil-Std 1913 Picatinny rail compatible

• Optimized for compact tactical optics

• Improves eye relief and shooting comfort

• Hard-anodized matte black finish

• Maintains strength, alignment, and zero retention under recoil

The GPO SetBackÔ retails for $89.99 and will be available through authorized GPO dealers nationwide and online at www.gpo-usa.com.

This entry was posted
on Friday, August 21st, 2026 at 22:00 and is filed under Optics, Press Release.
You can follow any responses to this entry through the RSS 2.0 feed.

A purpose-built, low-profile optic mount combining a 1.34-inch height, 20 MOA of forward elevation, and the strength of billet 7075-T6 aluminum.

Reptilia is proud to introduce the AGS Mount in 34mm with 20 MOA elevation, a precision optic mounting solution engineered specifically for modern bolt-action rifles and shooters pushing their capabilities at extended distances.

Built around a 1.34-inch optical centerline height over rail, the AGS places the scope lower and closer to the bore than many conventional precision rifle mounts. The result is a more natural shooting position, improved cheek weld, and a streamlined interface between the shooter, rifle, and optic.

SYMMETRIC, NON-CANTILEVER DESIGN

Unlike cantilever mounts that extend the optic forward of the mounting surface, the AGS features a symmetric, non-cantilever design that keeps the scope centered over the rifle’s receiver and mounting interface. This configuration is particularly well suited to bolt-action and precision rifles, where extended forward offset is typically unnecessary. By keeping the scope and rings balanced directly over the action, the AGS delivers a compact, streamlined mounting solution while maximizing rigidity and maintaining a clean, low-profile footprint.

The 34mm 20 MOA configuration is designed for precision rifles equipped with modern 34mm optics and shooters who require additional elevation adjustment for long-range applications. By incorporating 20 MOA of forward cant, the mount helps preserve valuable internal elevation travel for engaging targets at greater distances.

The AGS is machined from a single piece of billet 7075-T6 aluminum, providing the rigidity required for demanding precision applications while maintaining a weight of just 148 grams. Its one-piece design is paired with Reptilia’s proven mounting system, utilizing a spring-loaded, nitrided steel clamp and flush-fit hardware for secure, repeatable attachment to M1913 Picatinny rails.

Finished with MIL-STD Type III hardcoat anodizing, the AGS is built for hard use in the field, whether mounted to a dedicated long-range rifle, precision hunting rifle, or competition-focused bolt gun.

The Reptilia AGS 34mm 20 MOA Mount represents a purpose-driven approach to precision rifle mounting: lower where it matters, stronger where it counts, and configured to give shooters more usable elevation when the distance starts to stretch.

The 34mm / 20 MOA AGS is the first of several configurations planned for the product line. Additional versions will include:

• 30mm / 0 MOA
• 30mm / 20 MOA
• 34mm / 0 MOA
• 35mm / 0 MOA
• 35mm / 20 MOA

Features:

• 34mm scope ring diameter
• 20 MOA forward elevation
• 1.34-inch optical centerline height over rail
• Symmetric, non-cantilever design
• Machined from billet 7075-T6 aluminum
• One-piece construction for exceptional rigidity
• Spring-loaded, nitrided steel clamp
• Flush-fit, anti-snag mounting hardware
• MIL-STD Type III hardcoat anodized
• 148 grams
• Compatible with M1913 Picatinny rails
• Made in the USA

The AGS Mount is purpose-built for the modern bolt-action rifle.

MSRP: $349.95

For more information and to get your own AGS 34mm / 20 MOA, head over to the Reptilia AGS Mount – 1.34″ Height product page.

This entry was posted
on Thursday, August 27th, 2026 at 10:00 and is filed under Advertiser, Optics, Press Release.
You can follow any responses to this entry through the RSS 2.0 feed.

Same range workhorse. Now available with a 3 MOA green dot.

BARNEVELD, Wis. – Shooters have strong preferences when it comes to red dots. Some prefer red. Others prefer green, especially in certain lighting conditions. Now, these shooters have another option with the addition of the new green dot model in the Venom ® Enclosed Micro Red Dot lineup.

Range days don’t always come with perfect weather. The workhorse Venom® Enclosed Micro Red Dot family is equally at home on a pistol, offset on a carbine, or piggybacked on an LPVO. Adjustable brightness settings help keep the dot visible in changing light, while its enclosed design shields the emitter from rain, dust, or snow, so changing conditions never have have to cur a range session short.

ENCLOSED ALUMINUM HOUSING – Durable 6061 aluminum, blocks out weather, mud, snow, and debris.

LARGE VIEWING WINDOW – For fast target acquisition and a full sight picture.

ASPHERICAL LENS – For distortion-free sight picture and truer colors.

MOTION ACTIVATION WITH 10 MINUTE AUTO-SHUTOFF – Automatically activates with motion while 10 minute auto-shutoff saves battery life.

TOP BUTTONS – For hassle-free adjustments.

For some shooters, a green dot may be easier to pick up against certain backgrounds, in changing light inside or outdoors, or for those who simply see green better than red. The new model gives those shooters another option while preserving the controls, handling, and protection Venom® users already know.

The Venom® Enclosed Micro Green Dot is now available with an MSRP of $289.99 and a MAP of $199.99. To learn more, compare models, or find a dealer, check out the new Vortex® Store Locator .

This entry was posted
on Thursday, August 20th, 2026 at 16:00 and is filed under Optics, Press Release.
You can follow any responses to this entry through the RSS 2.0 feed.

Reptilia Releases Saddle Mount for Beretta A300 20 Gauge Shotguns

In military, law enforcement, and professional shooting environments, equipment is judged by performance under pressure, not by specification sheets or marketing claims. An optic either tracks correctly, holds zero, and remains usable under stress, or it doesn’t.

Apex Optics was developed with that standard in mind. The focus is straightforward: build precision rifle optics intended for duty use, where reliability, innovation, repeatable mechanical function, and usable optical performance are critical requirements.

All Apex optics are manufactured and assembled in Japan using Premium ED Japanese glass. The optical system is designed to provide clear resolution, usable contrast in variable lighting, and consistent performance across the full field of view. Internally, stainless steel components are used in the mechanical system to support long-term durability and repeatable tracking under sustained use. Each optic is assembled under controlled manufacturing and inspection processes to maintain consistency across production.

The design approach prioritizes function over feature density. Controls are intended to be predictable and repeatable, with an emphasis on mechanical integrity and ease of use under operational conditions.

Apex Optics is proud to share three of our products built around these principles.

Apex Edge 1-10×24 LPVO

The Edge 1-10×24 is Apex Optics’ Low Power Variable Optic (LPVO) designed for carbine use where both close-quarters speed and mid-range precision are required from a single optic.

The 1x setting is built for rapid, both-eyes-open engagement with minimal distortion and a consistent sight picture. At higher magnification, the optic provides usable detail for positive identification and precision shot placement at distance, without sacrificing clarity across the zoom range.

The optical system uses our Premium Japanese ED glasswith fully multi-coated lenses to maintain consistent light transmission and contrast through changing conditions. Internally, stainless steel components are used in the adjustment system to support repeatable tracking and long-term mechanical stability under recoil, sustained useand extreme temperature ranges.

The first focal plane HCR (Hybird Combat) Reticle remains usable across the entire magnification range, supporting both rapid engagement and holdover-based shooting without changing sighting systems or methods.

The Edge 1-10×24 is intended as a single optic solution for users who need to cover a wide engagement envelope with one platform.

Apex Vapor 1-4×22 Variable Zoom Prism Sight

The Vapor 1-4×22 Prism is a compact optic intended for carbine platforms where size, speed, and simplicity are prioritised, but magnification is still required beyond a fixed red dot.

Unlike traditional LPVO systems, the prism design provides a fixed optical path with a true 1x setting for close-range work and 4x magnification for mid-range identification and precision. The Vapors reticle remains visible at all times, allowing the optic to be used without illumination if required.

The FIRE reticle is etched directly into the optical system and remains constant across all conditions. Illumination is available for enhanced visibility, but the reticle itself does not rely on electronics to remain usable.

The compact prism housing reduces overall system length compared to most variable optics, making it suited for setups where rail space and handling characteristics are constrained.

The Vapor 1-4×22 is intended for users who want a lightweight, always-available sighting system that bridges the gap between red dot speed and low-magnification target identification.

Apex Ion 1×25 Enclosed Red Dot Sight

The ION 1×25 is a closed-emitter red dot sight designed for duty, carry, and professional use where durability, speed, and reliability are essential.

Built around a true 1x optical system with a wide 25mm objective window, the ION 1×25 delivers a clear, unobstructed sight picture for rapid target acquisition and confident engagement. Its design supports both-eyes-open shooting, allowing users to maintain situational awareness while achieving a fast, intuitive aiming reference.

Rather than a single-dot configuration, the ION 1×25 features the MRX multi-dot reticle system, giving users adaptable aiming options for a variety of shooting scenarios. Paired with multiple brightness settings, the system is engineered to maintain reticle visibility across changing lighting conditions, from low-light environments to bright daylight and high-glare conditions.

The closed-emitter design helps protect the optical system from debris, moisture, and impact during field use, supporting consistent performance in demanding environments. Japanese ED glass and multi-coated lenses help maintain clarity, contrast, and visual precision, while the rugged mechanical design is built to hold zero through extended operational use. The Ion 1×25 is intended for users who require a straightforward, enclosed red dot system for duty, training, and field environments. It will be available later this summer.

Apex Optics is focused on producing optics intended for duty, competition, and field use where mechanical consistency and optical performance are the primary requirements.

Additional product information, specifications, and availability details are available on our website, www.apexoptics.co

The Edge 1-10×24 and Vapor 1-4×22 are available now, and the Ion 1×25 will be available later this summer.

This entry was posted
on Wednesday, August 19th, 2026 at 16:00 and is filed under Optics, Press Release.
You can follow any responses to this entry through the RSS 2.0 feed.

Black Diamond – Men’s Technician Pro Mid Approach Shoes